CRUSHER® WIRELESS

 WALKTHROUGH

CONTROLS

Power On/Off: 

Power on: 

1. Hold main function button down for 3 seconds 

2. LED will flash purple to indicate powering on 

3. LED blinking blue indicates device is paired 

4. LED blinking red indicates device is not paired 

Power Off: 

• Hold main function button down for 3 seconds

Volume Up & Down: 

• Tap “+” or “-” buttons to turn volume up or down 

Change Audio Tracks: 

• Press and hold “+” to skip forward and “-” to skip back 

Take a phone call: 

• Answer/End call: Click main function button 

• Hold call: Press and hold main function button for 2 seconds  

Adjust the Bass: 

• Adjust slider up for more bass and down for less 

TROUBLESHOOTING

PAIRING ISSUES?

ISSUE: You’re having trouble pairing your Crusher™ Wireless with your device.

SOLUTION:

1. Remove your Crusher™ Wireless headphones from your device’s paired list.

2. Turn off Bluetooth mode on your device.

3. Press and hold the "+" and "-" buttons. This will clear the pairing history on your Crusher™ Wireless.

4. A voice prompt will say “Disconnected”, the headphone will go into pairing mode, and a voice prompt will say “Pairing”. If the headphones do not automatically go into pairing mode, press and hold the center button until voice prompt says “Pairing”.

5. At this time, turn on your device’s Bluetooth and look for “Crusher” in your list of available Bluetooth devices. For Android devices: Click “+ Pair New Device” and select “Venue” to pair your headphones to your device. 

6. After selecting “Crusher”, accept any “Pair” or “OK” prompts that appear on your screen. When pairing is complete, a voice prompt will say “connected.”

HEADPHONES WILL NOT CHARGE

Issue: Not seeing the LED light on Crusher™ Wireless that indicates headphones are charging.

• Wait momentarily after plugging the headphones in, occasionally it takes a few seconds to begin charging. 

• Check to see if any debris is inside or otherwise blocking the charging port on the side of the headphones. 

• Be sure to charge your headphones on a flat surface to ensure the USB connector on the charging cord is flush and securely inserted into the charging port. 

• When charging the device, we recommend using a cable, charger, or outlet with a power output that does not exceed 18-Watt (5 Volts/3.6amps). 

If you’ve checked everything above and are still experiencing issues, please visit our warranty page where you can file a claim to receive a replacement. All Skullcandy products have a 1-year warranty. 

WARRANTY

Does Crusher™ Wireless have a warranty?
Yep! 1 year. For more information, click here.